Norstar 7316, System Manual

Page: 42 / 294

42 / Answering an incoming call
Modular ICS 7.0 System Coordinator Guide N0000626 03
Line buttons
One line button for each line is assigned to your telephone.
Press the line button to select the line you want to answer or
use to make a call. Having several line buttons gives you
immediate access to more than one line.
The 7000 and 7100 digital telephones, analog telephones, and
Digital Mobility phones have two assigned intercom paths
which are used instead of line buttons to answer and make
calls. Each set can be assigned two lines. You can press
≥
to switch between two calls, one active and one on hold.
What line indicators mean
Note: -
On the Digital Mobility phone, the R (Recall)
key provides the same function as the Hold key on the
digital phones.
º
Flashing on and off
for equal lengths of
time There is an incoming call on the line
º
Flashing on and off
more quickly You have placed a call on hold
º
Flashing on for
longer than off Someone else has put a call on hold on that
line
º
On, not flashing You are connected to the call on that line or
the line is in use elsewhere
Off The line is free