Norstar 7316 System Manual Download

Page: 179 / 294

Using Silent Monitor /

179

N0000626 03

Modular ICS 7.0 System Coordinator Guide

Feature notes

•

You can only monitor external hunt group calls.

•

You must release all calls on your supervisor telephone
before you attempt to run a monitoring session.

•

The DN you choose to monitor must be a designated
member of a hunt group.

•

The supervisor telephone can be part of a hunt group.
Supervisor telephones cannot be monitored.

•

If the hunt group call gets transferred, the session is
dropped because the call is no longer a hunt group call.

•

If any of the parties release the call, the monitoring session
is dropped, and the supervisor will be prompted to pick
another DN to monitor.

•

To transfer a session to your handset when you start the
monitoring session in handsfree mode, press the display
key under

OTHER

and re-enter the DN, otherwise the

session will continue on your telephone speaker.

•

If your telephone is in Silent Monitor idle mode, and you
press the intercom button, the monitoring session will
terminate.

•

You can monitor calls that are forwarded to a hunt group
member.

•

If the call is parked, attached to a SWCA button, put on
Hold, or camped, Silent Monitor will drop the monitoring
session and the supervisor will receive an indication that
the hunt group telephone is now idle.

•

If the current hunt group call is part of a conference call, it
cannot be monitored.

No intercom button is currently available to
support the feature.

Need I/C key

Summary of Contents for 7316







































































































































































































































































































Search results

Summary of Contents for 7316

Reviews:

Related manuals for 7316

Brands by name

Popular brands

Norstar 7316, System Manual

Search results

Summary of Contents for 7316

Reviews:

Related manuals for 7316

Brands by name

Popular brands