manualshive.com logo in svg

Norstar 7316, System Manual

Share
Download
Norstar 7316 System Manual Download Page 169

Assigning or unassigning lines to a group / 

169

N0000626  03

Modular ICS 7.0 System Coordinator Guide

Assigning or unassigning lines to a group

You can assign one or several lines to a hunt group. 

Hunt group line notes:
•

Configure the prime set for a Hunt Group line to 

None

 to 

avoid delayed ring transfer of external Hunt Group calls to 
the prime set before the Hunt Group can receive the call.

•

A line can be assigned to only one group.

•

Do not assign any hunt group lines to individual 
telephones. If any of the telephones that are part of the hunt 
group have the line assigned, remove the line from the 
telephone before assigning it to the hunt group.

1. At 

Hunt groups

, press 

≠

. The display shows

 

Show group

.

2. Enter the Hunt Group number you want to program (1-30) 

or press 

‘

 to scroll through the groups.

3. Press 

≠

. The display shows

 

Member DNs:

.

4. Press 

‘

. The display shows 

Line assignment

.

5. Press 

≠

. The display shows

 

Show line:

.

6. Enter the line number you want to program or press 

SCAN

 

to go to the first line assigned to this group, or press 

LIST

 

to go to the first line in the system.

7. Press 

CHANGE

 to program the line as 

Unassigned

 or 

Assigned

.

*HGnn*

 means the line is assigned to another Hunt Group.

8. Press 

®

 to exit or 

‘

 to continue programming.

Summary of Contents for 7316







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands