manualshive.com logo in svg

Norstar 7316, System Manual

Share
Download
Norstar 7316 System Manual Download Page 228

228

 / Using Host System dialing signals

Modular ICS 7.0 System Coordinator Guide

N0000626  03

6. Press 

‘

 three times. The display reads 

Restrictions

.

7. Press 

≠

 twice.

8. Press 

‘

 three times. The display reads 

Allow 

link:

.

9. Press 

CHANGE

 to choose 

Y

 (Yes) or 

N 

(No).

Pause

≤‡°

The Pause feature enters a 1.5-second delay in a dialing 
sequence on an external line. This is often required for 
signaling remote devices, such as answering machines, or 
when reaching through to PBX features or host systems.

You can program more than one pause in an external autodial 
or speed dial sequence.

The Pause symbol (

›

) uses one of the 24 spaces in a dialing 

sequence.

For pulse dialing, 

•

 inserts a 1.5-second pause into the 

dialing sequence.

Tip - 

If your Norstar system is connected to a private branch 

exchange (PBX), program Link onto a memory button for one-
touch access.

Summary of Contents for 7316







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands