NF FRA51615, Instruction Manual

Page: 105 / 306

3.5 Operation screen reference
3
-
67
FRA 51615
■ [AUTO SEARCH]
: Set for automatic search after a sweep is completed.
When a sweep measurement is completed, the marker search can be performed automatically according to
the settings setting in [AUTO SEARCH] .
○ Setting method
< List operations (confirming) >
The parameters listed below can be set. For a description of the search, refer to [SEARCH X] ,
[SEARCH Y1] , and [SEARCH Y2] .
• OFF
: Automatic search is not performed.
• X MAX
: Automatically search for the maximum X value.
• X MIN
: Automatically search for the smallest minimum X value.
• X PEAK
: Automatically search for the largest maximal X value.
• X BOTTOM
: Automatically search for the smallest minimal X value.
• Y1 MAX
: Automatically search for the maximum Y1 value.
• Y1 MIN
: Automatically search for the minimum Y1 value.
• Y1 PEAK
: Automatically search for the largest maximal Y1 value.
• Y1 BOTTOM
: Automatically search for the smallest minimal Y1 value.
• Y2 MAX
: Automatically search for the maximum Y2 value.
• Y2 MIN
: Automatically search for the minimum Y2 value.
• Y2 PEAK
: Automatically search for the largest maximal Y2 value.
• Y2 BOTTOM
: Automatically search for the smallest minimal Y2 value.
• X
: Automatically search for the X value.
• Y1
: Automatically search for the Y1 value.
• Y2
: Automatically search for the Y2 value.
•
⊿
X
: Automatically search for the delta X value.
•
⊿
Y1
: Automatically search for the delta Y1 value.
•
⊿
Y2
: Automatically search for the delta Y2 value.