![NF FRA51615 Instruction Manual Download Page 54](http://html1.mh-extra.com/html/nf/fra51615/fra51615_instruction-manual_1684898054.webp)
3.2 Input and output connectors
3
-
16
FRA 51615
■ AUX
This is a special connector for supplying power to the "
5055 SIGNAL INJECTOR / PROBE
"
(optional) when using the probe for servo loop measurements. Use the cable that is provided with the
probe to connect the probe to this instrument. Do not use the cable for connecting any device other than
the
5055
.
Concerning use of the
5055
→
the
5055
manual.
It is possible to do servo loop measurements (loop characteristic measurements) even without the
5055
,
using this instrument alone. The isolation withstand voltage with this instrument is 600 V, but it is
restricted to 10 V when the instrument is used together with the
5055
. The advantage of using the
5055
is that it has little effect on measured circuits where the floating capacitance is extremely small. For more
information, refer to the manual for the
5055
.
AUX
FRA 51615 rear
FRA 51615 front
5055 SIGNAL INJECTOR /
PROBE (optional)
Supplied with
the 5055
Summary of Contents for FRA51615
