9.3 Measurement processing section
9
-
6
FRA 51615
Figure 9-1
Isolation voltage specifications relative to the enclosure
Figure 9-2
Isolation voltage specifications between signal connectors
When cables or probes, etc. are connected to the instrument, the voltage is restricted to the withstand
voltage specifications of the connected cable or probe, etc. or to the withstand voltage of the instrument,
whichever voltage is lowest.
9.3 Measurement processing section
Measurement operations
SPOT
Do a measurement at the current frequency (no sweep)
UP SWEEP
Do a sweep measurement (in order of increasing frequency)
DOWN SWEEP
Do a sweep measurement (in order of decreasing frequency)
REPEAT
Do measurements repeatedly
SINGLE
Do a single measurement
Measurement delay function
This function delays the beginning of a measurement after the frequency is changed.
Delay can be set either a duration or a number of cycles.
Time settings
Setting range
0 to 9,990 s
Setting resolution
3 digits or 0.1 ms, whichever is greater
Cycle settings (set in units of measurement frequency cycle)
Setting range
0 to 9,999 cycles, but no more than 9,990 s
Setting resolution
1 cycle
Start delay function
This function delays the beginning of a measurement only from the start of a sweep or spot measurement.
Delay can be set either a duration or a number of cycles.
Time settings
OSC
600 V CAT
Ⅱ
300 V CAT
Ⅲ
600 V CATII
300 V CAT
Ⅲ
CH1
600 V CAT
Ⅱ
300 V CAT
Ⅲ
600 V CAT
Ⅱ
300 V CAT
Ⅲ
600 V CAT
Ⅱ
300 V CAT
Ⅲ
CH2
600 V CAT
Ⅱ
300 V CAT
Ⅲ
600 V CAT
Ⅱ
300 V CAT
Ⅲ
600 V CAT
Ⅱ
300 V CAT
Ⅲ
OSC
CH1
CH2
600 V CAT
Ⅱ
300 V CAT
Ⅲ
600 V CAT
Ⅱ
300 V CAT
Ⅲ
600 V CAT
Ⅱ
300 V CAT
Ⅲ
Summary of Contents for FRA51615
