NF FRA51615, Instruction Manual

Page: 73 / 306

3.4 Operation tree
3
-
35
FRA 51615
【
Measure
】
: {measurement settings dialog}
[INTEGRATION MODE]
: Set the integration mode
[INTEGRATION]
: Set the integration count or time
[START DELAY]
: Set the start delay
[MEAS DELAY]
: Set the measurement delay
[SLOPE COMPENSATION]
: Set the potential slope elimination function
[d/dt]
: Set the integration and differentiation calculation
【
Sweep
】
: {Sweep settings dialog }
[SEQ SWEEP]
: Set sequence measurement
[SWEEP LOWER]
: Set the sweep lower frequency limit
[SWEEP UPPER]
: Set the sweep upper frequency limit
[SWEEP RESOLUTION]
: Set the sweep resolution
[REPEAT]
: Set the repeat mode
[FREQUENCY CHANGE MODE]
: Set the phase at which the frequency changes
[SLOW SWEEP]
: {set automatic high density sweep}
[CHANNEL]
: Select the channel for monitoring sudden change
[TYPE]
: Select the monitoring parameter type
[VARIATION]
: Set the threshold for automatic high density sweep
【
Graph
】
: {graph settings dialog}
[TITLE SET]
: Set the graph title
[STYLE]
: Set the graph layout style
[GRID]
: Set the gridlines
[STYLE]
: Set which gridlines are displayed
[DISPLAY MODE]
: {set axis format}
[X AXIS]
: Set the X axis format
[Y AXIS
] : Set the formats of the Y1 and Y2 axes
[DISPLAY UNIT]
: Select the display unit (gain or impedance)
[DISPLAY TRACE > ]
: {Select the data to be displayed}
[MEAS Y1]
: Set the measurement data to be displayed on the Y1 axis
[MEAS Y2]
: Set the measurement data to be displayed on the Y2 axis
[REF Y1]
: Set the reference data to be displayed on the Y1 axis
[REF Y2]
: Set the reference data to be displayed on the Y2 axis
[ANALYSIS MODE]
: Set the analysis mode