Upgrading Your System 4-7
Figure 4-4. Removing the Fan Cover
Installing the Fan Cover
To
install
the fan cover, perform the following procedures:
1.
Make sure all option boards are firmly seated in their respective slots and
that all interior cables are properly connected.
2.
Insert the fan cover on top of the fan module and push it in until it is fully
seated. Make sure the fan cover is oriented for the direction of air flow and
that the fan cable coming from the fan module is not restricted in any way.
The fan cable must be routed through the slot in the fan module. See Figure
4-5.
Note:
Ensure that the cover is installed properly and
securely.
A
B
C
D
A
– Fan cable
B
– Fan module slot
C
– Fan module
D
– Fan cover
Figure 4-5. Fan Cable Routing
Summary of Contents for EXPRESS5800/120Lf
