![background image](http://html.mh-extra.com/html/nec/express5800-120lf/express5800-120lf_user-manual_251187117.webp)
Upgrading Your System 4-31
Use this procedure to install a RAID controller board.
1.
Install the RAID controller board into any PCI slot on the system board. See
Installing an Option Board
earlier in this chapter.
2.
Cable the RAID controller board as described below:
!
Remove the end of the SCSI interface cable (1) that is plugged into the
Ultra 160 SCSI hard disk drive bay connector (SCSI A) on the system
board. See Figure 4-27.
!
Reinstall the end of the SCSI interface cable (2) just removed into the
Channel 0 connector on the RAID board. See Figure 4-27.
1
2
Figure 4-27. Cabling the RAID Controller Board
!
Install one end of the disk array controller (DAC) LED cable into the
LED cable connector on the RAID controller board and the other end of
the cable into the DAC LED cable connector on the system board.
See Figure 4-28.
A
B
A
System board
B
DAC LED connector
Figure 4-28. Installing the DAC LED Cable
Summary of Contents for EXPRESS5800/120Lf
