![background image](http://html.mh-extra.com/html/nec/express5800-120lf/express5800-120lf_user-manual_251187132.webp)
4-46
Upgrading Your System
A
B
C
A
Air baffle
B
Screws (4)
C
Drive carrier
Figure 4-44. Removing the Air Baffle
5.
Remove the device from its protective wrapper and place it on an antistatic
surface. Record the drive model and serial number in the equipment log.
!
CAUTION
Observe static precautions. Use an antistatic wrist strap.
6.
Set any drive jumpers or switches before you install the drive. See the
documentation that comes with the device for jumper or switch information.
7.
Place the drive into the disk carrier removed in steps 3 and 4 above. Orient
the drive so that its component side is down and its data connector is facing
the rear of the carrier. The connector should be flush with the rear of the
carrier. See Figure 4-45.
Note:
If the drive comes with drive rails, do not use
them. Remove any rails already attached.
8.
Using the four screws removed earlier, attach the carrier to the drive.
Summary of Contents for EXPRESS5800/120Lf
