NEC EXPRESS5800/120Lf, User Manual

Page: 76 / 198

3-16 Configuring Your System
Console Redirection Submenu
Feature
Choices or
Display Only
Description Your Setting
Serial Port Address
Disabled
On-board COM A
On-board COM B
When enabled, Console
Redirection uses the I/O port
specified. Choosing Disabled
completely disables Console
Redirection.
Interrupt 3
4 When Console Redirection is
enabled, this shows the IRQ
assigned per the COM Port
Address chosen above.
Base I/O Address 3F8
2F8 When Console Redirection is
enabled, this shows the base
I/O address assigned per the
COM Port address chosen
above.
Baud Rate 9600
19.2 KB
38.4 KB
57.6 KB
115.2 KB
When Console Redirection is
enabled, use the baud rate
specified. When EMP is
sharing the COM port as
console redirection, the baud
rate must be set to 19.2 KB to
match EMP baud rate, unless
auto-baud feature is used.
Flow Control None
CTS/RTS
XON/XOFF
CTS/RTS + CD
None = No flow control.
CTS/RTS = Hardware based
flow control.
XON/XOFF = Software flow
control.
CTS/RTS +CD = Hardware
based + Carrier Detect flow
control.
When EMP is sharing the
COM port as console
redirection, the flow control
must be set to CTS/RTS or
CTS/RTS+CD depending on
whether a modem is used.