NEC EXPRESS5800/120Lf, User Manual

Page: 42 / 198

2-6 Setting Up the System
A
B
A Center Slide Rail
B Safety Latch
Figure 2-1. Center Slide Rail
2. Align the mounting holes in each center slide rail to the threaded holes on
the side of the server (see Figure 2-2).
Note:
The holes in the center slide rails line up to the
server chassis only when the safety latch (C) is pointed
towards the front of the server.
3. Secure each center slide rail to the server with four screws, as shown in
Figure 2-2. Ensure the safety latch (C) is pointed towards the front of the
server.
A
B
C
B
B
A Center Slide Rail (2)
B Screws (8)
C Safety Latch
Figure 2-2. Attaching the Center Slide Rail to the Server