NEC EXPRESS5800/120Lf, User Manual

Page: 53 / 198

Setting Up the System 2-17
Rear View
Figure 2-10 shows the location of the system's rear connectors, I/O ports, and
indicator.
Note
: For hot-swap systems in place of the single
300-Watt power supply a power supply module is provided
containing up to two 350-Watt power supply units. Each
power supply unit contains a power supply status LED
indicator. See Table 2-2 for a list and description of the
350-Watt Power Supply Status LED Panel indicator later in
this chapter.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
A AC input power connector Supplies AC power to the power supply
B
Ultra-160 SCSI Connector Connects to External SCSI Devices
C Serial Port B COM2 serial port 9-pin connector (Turquoise)
D 66 MHz, 64-bit PCI Slots Two 66 MHz, 64-bit PCI add-in board slot locations
E 33 MHz, 32-bit PCI Slots Two 33 MHz, 32-bit PCI add-in board slot locations
F 66 MHz, 64-bit PCI Slots Two 66 MHz, 64-bit PCI add-in board slot locations
G LAN1 connector RJ-45 Ethernet connector
H LAN2 connector RJ-45 Ethernet connector
I VGA connector VGA monitor 15-pin connector (Blue)
J Printer port Parallel port 25-pin connector (Burgundy)
K Serial Port A COM1 serial port 9-pin connector (Turquoise)
L Stacked USB Ports USB1, USB2, and USB3 connectors (Black)
M Keyboard port PS/2-compatible 6-pin mini-DIN connector (Purple)
N Mouse port PS/2-compatible 6-pin mini-DIN connector (Green)
Figure 2-10. Rear Features and Controls