![background image](http://html.mh-extra.com/html/nec/express5800-120lf/express5800-120lf_user-manual_251187091.webp)
Upgrading Your System 4-5
Installing the Side Access Panel
To install the
left-hand
side access panel (see Figure 4-2):
1.
Check to make sure that no tools or loose parts have been left inside the
system chassis.
2.
Make sure all option boards are firmly seated in their respective slots and
that all interior cables are properly connected.
3.
Insert the locking fingers on the top and bottom of the side access panel into
their slots on the chassis. Then slide the side access panel forward as far as it
will go.
Note:
Ensure that the side access panel is installed
properly and securely fastened. A cover sensor (intrusion
switch) monitors the left-hand side access panel.
4.
Tighten the side access panel thumbscrews.
Note:
If your system is already set up, plug the system
back in, reconnect the peripherals, and power on the
peripherals and system.
Figure 4-2. Installing the Left-Hand Side Access Panel
Summary of Contents for EXPRESS5800/120Lf
