NEC EXPRESS5800/120Lf, User Manual

Page: 68 / 198

3-8 Configuring Your System
Advanced Menu
Feature Description Your Setting Your Setting
Memory Configuration Select sub-menu.
PCI Configuration Select sub-menu.
I/O Device/peripheral
Configuration Select sub-menu.
Advanced Chipset
Control Select sub-menu.
Boot-time Diagnostic
Screen Disabled
Enabled
If enabled, the BIOS will display
the OEM logo during POST.
This option is hidden if the BIOS
does not detect a valid logo in
the flash area reserved for this
purpose.
Reset Configuration
Data No
Yes
Select ‘Yes’ if you want to clear
the System configuration Data
during next boot.
Automatically
reset to ‘No’ in next boot.
Installed O/S Other
PnP O/S
If PnP O/S is selected, only the
devices required to boot the
system are configured.
If Other is selected, all devices
are configured.
Numlock On
Off
Sets power on Numlock state.
Memory/Processor Error Boot
Halt
Selects the behavior of the
system in response to a Memory
or Processor reconfiguration.
If
set to Boot, the system will
attempt to boot.
If set to Halt, the
system will require user
intervention to complete booting.
Memory Configuration Menu
Feature
Choices or
Display Only
Description Your Setting
Memory Group #1 Status
Memory Group #2 Status
Memory Group #3 Status
Normal
Not Installed
Disabled Displays the current status of
the memory bank.
Disabled
indicates that a DIMM in the
bank has failed and the entire
bank has been disabled.
Memory Retest
No
Yes
Causes BIOS to retest all
memory on next boot.
Extended RAM Step Disabled
1 MB
1 KB
Every- Location
Selects the size of step to use
during Extended RAM tests.