NEC EXPRESS5800/120Lf, User Manual

Page: 54 / 198

2-18 Setting Up the System
Status LED Indicator Descriptions
Table 2-1 lists the system status LED indicators along with a description of each
LED indicator. Table 2-2 lists and describes the 350-Watt power supply status
LED panel indicator. Table 2-3 lists system status abnormal conditions. Refer to
Figure 2-7, Figure 2-8, and Figure 2-9 for the location of the LED indicators
listed in Table 2-1.
The activity LED indicators for the CD-ROM drive and the diskette drive light
when access is being made to the media in the drive.
Table 2-1. System Status LED Indicators
LED Status Description Response
Off Power OFF or Sleep (S4). None required (normal)
Green Power ON. None required (normal)
Power/Sleep Status
Flashing
Green Standby/Sleep (S1). None required (normal)
Green System ready. None required (normal)
Flashing
Green Processor or memory disabled. Check condition
Amber Critical temperature or voltage fault.
CPU/terminator missing. Check condition
Flashing
Amber Power fault.
Fan fault.
Non-critical temperature or voltage fault. Check condition
Status
Off Fatal error during POST Check condition
Flashing
Green Hard drive activity. None required (normal)
Amber Hard drive failure. Check disk drive status
LEDs
2
Hard Drive Activity
Off No activity. None required (normal)
Green Linked None required (normal)
Flashing
Green LAN activity. None required (normal)
LAN #1 Activity
Off Disconnected. None required (normal)
Green Linked None required (normal)
Flashing
Green LAN activity. None required (normal)
LAN #2 Activity
Off Disconnected. None required (normal)
Blue Server identification:
Toggled by ID button or software. None required (normal) ID LED
1
Off Server identification:
Toggled by ID button or software. None required (normal)
1
Rack-Mount System only.
2
Hot-Swap System only.