![background image](http://html.mh-extra.com/html/nec/express5800-120lf/express5800-120lf_user-manual_251187123.webp)
Upgrading Your System 4-37
Installing or Swapping a Hard Disk Drive in a Non-Hot-Swap
Disk Drive Bay
This procedure describes installing a new hard disk drive or swapping out a
disk drive in a SCSI disk drive bay. Disk drives must use the industry
standard 68-pin Wide SCSI interface connector.
Note:
To order a hard disk drive, contact your sales
representative or dealer.
!
If installing new drives, follow an installation scheme starting with the
top-most drive. Fill the bays top-to-bottom (1 through 5).
See Figure 4-34.
1
2
3
4
5
Figure 4-34. SCSI Disk Drive Installation Scheme
!
The suggested hard disk SCSI address assignment is:
Bay
Device
SCSI ID Address
1
First Hard Disk (Top)
0
2
Second Hard Disk
1
3
Third Hard Disk
2
4
Fourth Hard Disk
3
5
Fifth Hard Disk (Bottom)
4
Summary of Contents for EXPRESS5800/120Lf
