NEC EXPRESS5800/120Lf, User Manual

Page: 131 / 198

Upgrading Your System 4-45
Installing a Hard Disk Drive
1. Observe the safety and ESD precautions listed under General Information
and Static Precautions at the beginning of this chapter.
2. Prepare your system for upgrade. See Preparing Your System for Upgrade
described earlier in this chapter.
3. Remove the disk carrier from the bay where you are installing the hard disk
drive. The disk carrier is released by pressing the lock on the top of the
carrier handle down, pulling the carrier handle towards you, and pulling the
carrier from the bay. See Figure 4-43.
Note:
The dummy disk carrier is provided to maintain
the proper cooling effect. Leave the dummy disk carrier in
unused slots so that the server can operate efficiently.
(Keep all removed dummy disk carriers for future use.)
!
CAUTION
Do not insert your hand or any tool into the slot with the disk
tray or dummy disk carrier removed. Failure to follow this
caution may cause an electric shock or fire.
1
2
Figure 4-43. Releasing and Removing the Disk Carrier
4.
Remove the four screws that hold the air baffle to the carrier and remove the
air baffle. See Figure 4-44. Save the air baffle for future use.