NEC EXPRESS5800/120Lf, User Manual

Page: 49 / 198

Setting Up the System 2-13
A Load/eject button, CD-ROM reader Press to load CD and eject CD.
B Activity LED, CD-ROM reader When lit, CD-ROM reader is in use.
C Eject button, 3 ½-inch diskette drive Press to eject diskette.
D Activity LED, 3 ½-inch diskette drive When lit, diskette is in use.
E USB port Front USB connector
F Status LED When green, the system is ready. See Table 2-1
for a list and description of the system LEDs.
G Power/Sleep Status LED When green, power is present in the system and
system is not in Sleep Mode. See Table
2-1 for a list and description of the system LEDs.
H Hard drive activity When green, hard drive is active. See Table
2-1 for a list and description of the system LEDs.
I Power button Press to turn system DC power on or off.
J Sleep Button Press to enter power saving (sleep) mode. Press
again to enter normal mode of operation. (This
function requires a corresponding operating
system.)
K LAN #2 activity LED When green, system is linked. See Table
2-1 for a list and description of the system LEDs.
L LAN #1 activity LED When green, system is linked. See Table
2-1 for a list and description of the system LEDs.
M Reset button Resets the system.
Figure 2-7. Front System Controls, Indicators, and I/O Port (Non-Hot-Swap Bays)
(Continued)