NEC ELECTRA ELITE IPK II, Programming Manual, Page: 360 / 617

Electra Elite IPK II Programming Manual 2 - 325
Program
34
Description
Use Program 34-01 : E&M Tie Line Basic Setup to defines the basic settings
for each E&M Tie line.
Program 34 : Tie Line Setup
34-01 : E&M Tie Line Basic Setup
Level:
IN
Input Data
Trunk Port Number 001~200
Item
No.
Item Input Data Default Description
Related
Program
01 DID/E&M Start
Signaling
0 = 2
nd
dial tone
1 = Wink
2 = Immediate
3 = Delay
1 Set the start signaling mode for
DID and tie trunks. DID and tie
trunks can use either
immediate start or wink start
signaling. 22-02
02 --- Not Used ---
03 E&M Dial-In Mode 0 = Specify Extension
Number (Intercom)
1 = Use conversion
table (NTT)
0 Determine if the incoming Tie
Line call should be directed as
an intercom call or if it should
follow the DID Translation
Table in Program 22-11. 22-11
04 E&M Line Dial Tone
0 = Disable (No)
1 = Enable (Yes)
1 Enter 1 if the Tie Line should
send dial tone to the calling
system once the call is set up.
Enter 0 if the Tie Line should
not send dial tone.
05 System Toll
Restriction 0 = No
1 = Yes
0 Determine if an incoming Tie
Line call should be subject to
Toll Restriction.