NEC ELECTRA ELITE IPK II, Programming Manual

Page: 260 / 617

Electra Elite IPK II Programming Manual 2 - 225
Program
22
Description
Use Program 22-01 : System Options for Incoming Calls to define the
system options for incoming calls.
Program 22 : Incoming Call Setup
22-01 : System Options for Incoming Calls
Level:
IN
Input Data
Item
No.
Item Input Data Default Description
Related
Program
01 Incoming Call
Priority 0 = Intercom
Call
Priority
1 = Trunk Call
Priority
1 Use this option to determine if Intercom
calls or trunk calls have answer priority
when both are ringing simultaneously. 15-02-22
02 Incoming Call
Ring No Answer
Alarm 0 = Disable
(Off)
1 = Enable
(On)
0 If enabled, an incoming call that rings
longer than the Ring No Answer Alarm
interval (22-01-03), will change to a
unique ring cadence to indicate that the
call has been ringing too long. If
disabled, this will not occur. 22-01-03
22-01-04
03 Ring No Answer
Alarm Time 0~64800 (sec.) 60 If a trunk rings a multiline telephone
longer than this interval, the system
changes the ring cadence. This
indicates to the user that the call has
been ringing too long. 22-01-02
04 DIL No Answer
Recall Time 0~64800 (sec.) 0 A DIL that rings its programmed
destination longer than this interval
diverts to the DIL No Answer Ring
Group (set in Program 22-08).
05 -- Not Used --
06 DID Ring-
No-Answer Time 0~64800 (sec.) 20 In systems with DID Ring-No-Answer
Intercept, this interval sets the Ring-No-
Answer time. This interval is how long a
DID call rings the destination extension
before rerouting to the intercept ring
group. 22-12
07 DID Incoming
Ring Group no
answer timer 0~64800 (sec.) 20