NEC ELECTRA ELITE IPK II, Programming Manual, Page: 131 / 617

Document Revision 1 Electra Elite IPK II
2 - 96 Program 14 : Trunk, Basic Setup
Description
Use Program 14-06 : Trunk Group Routing to set up an outbound routing table for
the trunk groups you assigned in Program 14-05. When users dial 9, the system
routes their calls in the order (priority) specified. For example, if a user dials 9 and all
calls in the first group are busy, the system may route the call to another group. Trunk
Access Map programming (Programs 14-07) may limit this option. The system
contains 100 routing tables for trunk access. Each table has four priority orders for
trunk access. There are 100 Trunk Group Numbers that are available.
Program 14 : Trunk, Basic Setup
14-06 : Trunk Group Routing
Level:
IN
Example for setting:
With less than 4 trunk groups,
Route Number 1 : Order 1 – Trunk Group 1
: Order 2 – Trunk Group 2
For the above setting, if all the lines in trunk group 1 are busy, the system searches
for an idle line in trunk group 2.
With more than 4 trunk groups,
Route Number 1 : Order 1 – Trunk Group 1
: Order 2 – Trunk Group 2
: Order 3 – Trunk Group 3
: Order 4 – 1002 (Jump To Route Number 2)
Route Number 2 : Order 1 – Trunk Group 4
: Order 2 – Trunk Group 5
For the above setting, if all the lines in the trunk group 1, 2 and 3 are busy, the system
searches for an idle line in trunk group 4 and 5.