NEC ELECTRA ELITE IPK II, Programming Manual, Page: 236 / 617

Electra Elite IPK II Programming Manual 2 - 201
Program
21
Description
Use Program 21-01 : System Options for Outgoing Calls to set the system
options for Outgoing Call Service.
Program 21 : Outgoing Call Setup
21-01 : System Options for Outgoing Calls
Level:
IN
Input Data
Item
No.
Item Input Data Default
Related
Program
01 Seizure Trunk Line Mode 0 = Priority Route
1 = Circular Route 0 14-05
14-06
02 Intercom Interdigit Time
When placing Intercom calls,
extension users must dial each digit
within this interval.
0~64800 (sec) 10
03 Trunk Interdigit Time (External)
The system waits for this timer to
expire before placing the call in a talk
state (Call Timer starts after timer
expires, Voice Over and Barge-In are
not allowed until after timer expires).
0~64800 (sec) 5 14-02-08
04 Researched Time for DTD Circuit 0~64800 (sec) 5 14-02-05
05 Dial Tone Detection Time
If dial tone detection is enabled, the
system will wait this interval for the
Telco to return dial tone. When the
interval expires, the system assumes
dial tone is not present. To disable this
timer (and have the system wait
continuously), enter 0.
0~64800 (sec) 3
06 Dial Pause at First Digit 0~64800 (sec) 1
07 Toll Restriction Override Time
After dialing the Toll Restriction
Override codes, the system removes
Toll Restriction from the extension for
this interval.
0~64800 (sec)
10 20-08-06
21-07