NEC 78014Y Series, User Manual

Page: 224 / 547

www.DataSheet4U.com
CHAPTER 10 WATCH TIMER
224
10.2 Watch Timer Configuration
The watch timer consists of the following hardware.
Table 10-2. Watch Timer Configuration
Item Configuration
Counter 5 bits
×
1
Control register Timer clock select register 2 (TCL2)
Watch timer mode control register (TMC2)
10.3 Watch Timer Control Registers
The following two types of registers are used to control the watch timer.
• Timer clock select register 2 (TCL2)
• Watch timer mode control register (TMC2)
(1) Timer clock select register 2 (TCL2)(Refer to Figure 10-2.)
This register sets the watch timer count clock.
TCL2 is set with an 8-bit memory manipulation instruction.
RESET input sets TCL2 to 00H.
Remark Besides setting the watch timer count clock, TCL2 sets the watchdog timer count clock and buzzer
output frequency.