NARGESA MP3003 CNC, Instruction Book, Page: 67 / 112

ANEXO 1. SOFTWARE ESA S630 A49
In order to find the correct height of the end of the bend the operator can adopt various methods:
- If the quota to be reached is greater than the quota of the end of the bend calculated, the new quota can
only be searched using the up pedal ;
- If the quota to be reached is lower than the quota of the bend calculated, the operator must enable the Re
- Ascent to TDC with ascent enabling input, and without releasing the down pedal at the quota of the end of
the bend have to press the or the Start button in order to go down by a tenth or a hundredth of
millimetre at a time.
The procedure can be activated from the SEMIAUTOMATIC page like following:
- Press
- Press the START button to position the back gauges Axes;
- Press the Down pedal for make the bend;
- Search for the point of the desired end of the bend via the procedure described above;
- Press [Y self-teach.];
- Press the up pedal;
- Repeat the procedure for all the bends of the program; in order to move between the various bends use
the and button.
Once the self-teaching has been completed for all the bends:
- Press and execute the program from the first bend.