NARGESA MP3003 CNC, Instruction Book, Page: 29 / 112

ANEXO 1. SOFTWARE ESA S630 A11
How to erase a punch or die
Allows you to eliminate a tool. Select the tool you wish to eliminate, selecting it with a finger, and comply
with the procedure below:
- Press the button
- Press
[Ok]
- The selected tool will be erased.
Save all tools on USB
Allows you to save all the tools on USB so that they can then be transferred to another numeric control
(useful when must be created backup copies). Comply with the procedure below:
- Insert into the USB port a USB device formatted with enough space to hold the tools.
- Press the button to access the menu
- Select the
2>> Save Tools
- All the tools (dies and punches) will be saved on USB.
Erase all tools
Used to erase all the tools. Comply with the procedure below:
- Press the button to access the menu
- Select the
3>> Delete Tools item .
All the tools will be Deleted selecting the [Yes] button.
Tools list on USB device
Used to display the list of tools USB device. The possible operations are the same as the tool list, then you
can copy, rename, and delete all tools present on the USB device. Select the list punches and dies and
perform the following steps:
- Insert into the USB port a device containing tools (created by kvara S630 Touch)
- Press the button.
- The list of punches or dies on USB will be displayed
- Proceed with the required operation.
How to save all tools from USB to NC
Allows you to save the tools from an USB external memory to the internal NC disk, so that they can be
downloaded from another numeric control. Comply with the following procedure:
- Insert into the USB port a device containing tools
- Press the button
- List with punches and dies of the USB device is displayed
- Press the button to access the menu
- Select the
[Save Tools] menu.
All the tools (dies and punches) will be saved from the USB external memory to the internal NC disk.