NARGESA MP3003 CNC, Instruction Book, Page: 46 / 112

ANEXO 1. SOFTWARE ESA S630 A28
Changing the work unit
This operation can be performed in the following sequence:
- Press the button to open the Program list
- Press the button to open the menu
- Press
5 >> Change work drive .
- Select with a finger a work drive from the list
Figure 17 View of the operation for changing the work unit.
3.2. Entering a numeric program
To enter a new numeric program press [New Programm] from the Editor page of a numerical program and
select
[New numerical]:
Figure 18 New numerical program
Or it can be create from the program list pressing and [New numerical].