NARGESA MP3003 CNC Instruction Book Download Page 45 | Manualshive

Page: 45 / 112

NARGESA MP3003 CNC Instruction Book Download Page 45

ANEXO 1. SOFTWARE ESA S630

A27

Deleting all the programs

This allows you to delete all the programs. Follow the steps below:
- Press the button to open the menu.
- Select the item

3>> Delete programs

.

- All the programs will be deleted (you will be asked the confirm).

Programs list on the USB device

This allows you to view the program list on the USB device. The possible operations are the same as for
the tool list therefore it is possible to copy, rename and delete all the tools present on the USB device.
Select the program list and follow the steps below:
Insert the USB device containing the programs into the USB port.
- Press the button.
- The programs list on the USB device will be displayed.
- Execute the desired operation.

Saving a program from a USB device to NC

This allows you to save a program on NC from a USB device in order to be able to download it from
another control. Select the program you wish to save with a finger and follow the steps below:
- Press the button;
- The program selected will be saved from the USB device to NC.

Saving all the programs from a USB device to NC

This allows you to save the programs on NC from a USB device in order to be able to download them from
another control. Follow the steps below:
- Insert a USB device containing the programs into the USB port.
- Press the button. The programs list on the USB device will be displayed
- Press the button to open the menu.
- Select the item

2>> Save programs

.

- All the programs will be saved from the USB device to NC.

«
...
43
44
45
46
47
...
»

Summary of Contents for MP3003 CNC

















































































































Reviews:

No comments