NARGESA MP3003 CNC, Instruction Book, Page: 104 / 112

ANNEX 3. LASER DEVICE C6
Ø 14 mm
9. Assembling
The assembling of Emitter –Recetor units will be made in the laterals of the Ram on the supports designed
for such an effect. The assembling is made by two M8 screws (key nº 13)
And a support plate. The regulation in height will be made by using the standard regulation tooling and
following the indications of Anex G of the Regulation EN-12622:2011+A1:2013 we summarize next.
10. Test 1. Detection capacity
We make sure that if we lean the tooling handle (diam 14mm) all along the punch length, the laser ray will
be interrupted. Pict.6
Picture 6