NARGESA MP3003 CNC, Instruction Book, Page: 48 / 112

ANEXO 1. SOFTWARE ESA S630 A30
Figure 21 Die list page, example of die insertion
- The
material is calculated automatically depending on the resistance.
- Enter the work station if more than one or if they are defined, otherwise leave 0.
- Enter the die that will be used from the list touching with a finger on the field, scrolling the toolbar in order
to choose the die and pressing the button [Insert] (the die must already have been drawn), like showed in
the figure 21.
- Enter the
V-die of the die that will be used for the bend, touching with a finger on the field and
selecting [Ok] (a die can have more than one V-die; in the event of only having one, enter 1). To the right
appears the width of the V-die selected.
- Enter the
punch that will be used from the list touching with a finger on the field, scrolling the toolbar in
order to choose the punch and pressing the button [Insert] (the punch must already have been drawn).
Setting the bends
The cursor now moves into the fields for setting the bend.
Set for each bend:
- The desired bend angle in the
Y1 Angle field.
- The desired bend length in the Field Final X1 field.
All the other data relating to the bend will be calculated automatically but they can still be changed by the
user.