NARGESA MP3003 CNC, Instruction Book, Page: 31 / 112

ANEXO 1. SOFTWARE ESA S630 A13
- Press
-
[New Drawing] to completely design the punch;
- [New Type 1] to use a pre-set punch type 1;
- [New Type 2] to use a pre-set punch type 2;
- [New Type 3] to use a pre-set punch type 3.
- [New Type 4] to use a type 4 pre-set punch (round punch).
A window will be opened requesting entry of the punch dimensions:
Figure 4 Punch dimensions
Enter the total height and working height as indicated in the figure.
Access to the drawing page
Access the drawing page once the punch dimensions have been entered and the type of punch selected.
The drawing page changes, depending on the type of punch selected:
- Select the
[Ok] button.
2.1.2 Punches to draw
The punches to draw page is obtained by means of the drawing function (see relative chapter of this
manual).
Figure 5 Punch drawing page