NARGESA MP3003 CNC, Instruction Book, Page: 37 / 112

ANEXO 1. SOFTWARE ESA S630 A19
Press:
-
[New drawing] to completely design the die;
- [New default] to use the data of the pre-set die.
A window will be opened requesting entry of the die dimensions:
Figure 10 Die dimensions
Enter the die width and the die height as indicated in Figure 10 selecting with a finger the fields “width” and
“hight”.
Access to the drawing page
Access at the drawing page once the die dimensions have been entered and the type of die selected. The
drawing page changes, depending on the type of die selected:
Select the
[Ok] button.
2.2.1 Dies to draw
The dies to draw page is obtained by means of the drawing function (see relative chapter in the operator
manual).
Figure 11 Die drawing page