NARGESA MP3003 CNC, Instruction Book, Page: 27 / 112

ANEXO 1. SOFTWARE ESA S630 A9
2. PUNCHES AND DIES SETUP
2.1. Punches and dies list
Comply with the following procedure to access the tools list:
- Press ; to display the list of punches or list of dies.
- If the list of dies appears, press again to display the punches, or vice versa.
The following window will appear in the case of punches:
Figure 1 Punches list
The window on the left is the punch list window.
The central boxes show the data related to the selected punch (highlighted by the cursor).
The window on the right gives a preview of the punch to which the cursor has set.
The following window will appear in the case of dies:
Figure 2 Dies list
The window on the left is the die list window.
The central boxes give the data of the die to which the cursor has set (in the list).
The window on the right gives a preview of the die to which the cursor has set.