NARGESA MP3003 CNC, Instruction Book, Page: 101 / 112

ANNEX 3. LASER DEVICE C3
1. General description
The press brake laser device is a safety system with no physicla contact that allows us to be according to
the regulation EN-12622:2011+A1:2013 regarding Hydraulic Press Brakes
2. Range of use
The range of use of this laser devices is the Nargesa Press Brakes machines equipped with punches and
“V” dies.
3. Aims
The aim of this laser device is to protect the user of the machine against any risk of entrapping taht may be
caused during the use of the machine.
4. Regulation
The laser device for Press Brakes is according to the regulation IEC 61496, Type 4.
It’s self controlled and it does not requires any additional circuits.
The adjustment position is easy to graduate each time the punch is changed.
5. Components
The laser device for Press Brake has got the following elements.
2 Units of Laser Emitter– receptor. Located at the extremes of the Ram.
1 Safety Module Category 4. In the inside of the Electric Box.
1 Whitening device (folding of boxes).
1 Light indicator of whitening activation.
6. Identification
Each set of Emitter-receptor brings up its own identification labels and indicator warnings of the laser ray.
The laser ray is classified as the category 2M with its respective safety labels stucked to the device. It is
quite difficult the ace could be seen directly due to its location.
Laser Warning Label Identification label