NARGESA MP3003 CNC, Instruction Book, Page: 54 / 112

ANEXO 1. SOFTWARE ESA S630 A36
Bend sequencing
This allows you to view the sequence via which the piece must be bent. Follow the steps below:
- From the AUTOMATIC graphic page press the button to open the menu.
- Select the item
0>> Bending sequence .
- Move among the various bends by pressing the and buttons.
Change color
This allows you to change the color of the background of the piece to bend.
- From the AUTOMATIC graphic page press the button to open the menu.
- Select the item
1>> Change color.
3D Viewer (Optional in the S630 model)
This allows you to view the drawing in 3D. Follow the steps below:
- From the AUTOMATIC graphic page press the button to open the menu.
- Select the item
3>> 3D Viewer .
- To return to the 2D view press the button.
How to realize the drawing of a piece
Let's suppose we have to draw the piece illustrated in the figure below:
Figure 30 Example of piece to be drawn (external measures)
The cursor is located in the field “l” of the window for the polar setting of the drawing data:
- Enter in the field “l”, the length corresponding to the first section of the piece to be drawn (20.0).
- Press
[Ok].
- Enter the value of the first angle (120.0°) in the field “alfa” (value of the angle compared to the following
length).
- Press
[Ok], the next length will be drawn in automatic mode; the length that the data refer to will be
highlighted.
- Enter the length in the field “l” corresponding to the second length of the piece to be drawn (47.11).
- Press
[Ok].