NARGESA MP3003 CNC, Instruction Book, Page: 63 / 112

ANEXO 1. SOFTWARE ESA S630 A45
Automatic graphic page
If the program currently selected is a calculated graphic program the automatic graphic page can be
viewed by pressing [Graphic]; this page consists of three windows:
The main window contains the drawing of the upper and lower parts of the machine, the drawing of the
punch and the die entered in the program, the drawing of the piece before and after the bend, and the
drawing of the stop.
The second window shows how to orient the piece for each bend (upsetting or rotation of the metal sheet
compared to the previous bend).
The third window contains the data of the bend in progress, the piece counter and the Development of the
metal sheet.
Figure 34 Automatic graphic page
Automatic numeric page
If the program currently selected is numeric, added to the numeric setting data there will also be the current
quota of the axes; it is not possible to change the program data in automatic mode.
Figure 35 Automatic numeric page