MUTOH ValueJet VJ-1204, Operation Manual

Page: 162 / 186

7 Troubleshooting VJ-1204 OPERATION MANUAL
7-10
TIP
• The value of the Authorization Code may be displayed for the display of the option function.
For details, contact your local MUTOH dealer.
7.2.2 Error message display and remedies
This section describes error messages and remedies.
Error messages are displayed when certain failures occur during printer operation.
If an error that can be displayed occurs, the printer may display the following error messages on the
operation panel and stop operation.
If the printer stops operating, solve the error so that the printer restarts.
17 Transport Mode Preparing for transportation. Please wait a
while.
6.3.2
Transporting the
printer
18 Media: Type ** OK? Initializing the media.
Please wait a while.
(** represents the setup media type.)
3.4.3 Setting
media type
19 Media Initial
20 Cover Open The front cover is open.
3.4 Setting
media
21 Lever Up The media loading lever was switched to
the back side. Set the media.
3.4 Setting
media
No. Display Description Remedy Reference
1 Undefined Media Failed in identifying the
media.
(Stops operation) Reload the media.
3.4 Setting
media
2 Media Slant The media was not fed
straight.
(Stops operation) Reload the media.
3.4 Setting
media
3 End Of Roll The roll media has run out.
(Stops operation) Load a new roll media.
6.1.2
Replacing roll
media
4 [****] InkNearEnd Ink is running out.
(Continues operation) Prepare a new ink cartridge.
6.1.1
Replacing ink
cartridges
5 [****] Ink End Ink has run out.
(Stops operation) Replace with the new ink
cartridge.
6.1.1
Replacing ink
cartridges
6 [****] No Cartridge Cartridge is not inserted.
(Stops operation) Insert an ink cartridge.
3.3 Installing
ink cartridges
7 [****] Not Original A genuine ink cartridge is
not inserted.
(Stops operation) Insert a genuine ink
cartridge.
6.1.1
Replacing ink
cartridges
No. Display Description Reference