MUTOH ValueJet VJ-1204, Operation Manual

Page: 113 / 186

VJ-1204 OPERATION MANUAL 5 Panel setup menu
5-29
5.2 TestPrint Menu
Performs nozzle check of the print head and setup list.
TIP
• Refer to the following for the operation procedure of test print.
3.5 Test print
Setup item Description
Nozzle check Perform the nozzle check printing.
It is used to check whether there are any clogged heads, or missing or blurred
prints.
3.5.1 Nozzle check
Mode print Mode print can be performed.
Used to confirm the following printing conditions.
• Print quality
• Effect
• Pre Heater temperature
• Platen Heater temperature
• After Heater temperature
• Adjustment value
3.5.2 Mode print
SetUp List Setup list printing is performed.
Use it for checking the setup item of the printer.
3.5.3 Setup print
ALL SetUp List Setup list printing is performed.
Use it for checking the setup item, user media and print mode of the printer.
3.5.3 Setup print
Palette Palette printing is performed.
It is used to compare pen colors of the computer with colors of the printer.
3.5.4 Palette print
NOTE
• When "Banner 1" or "Banner 2" is set in the Print Mode
menu, "PalettePrint" is not displayed.
5.1.1.1.1 Print Mode menu
— • [Enter] key:
"Printing" is displayed on the operation panel and test printing starts.
• [Cancel] key: shifts to the previous menu.
5 Panel setup menu