Muratec F-525, Field Engineering Manual

Page: 111 / 383

3-27
Machine Parameter 242 ~ 246 — Factory use only
Machine Parameter 247
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Printer registration
adjustment.
Adjusts the bottom margin at
the Bypass tray for printing.
The plus setting decreases
the bottom margin and the
minus setting increases it.
Each setting changes by
0.1 mm.
Switch 76543210 Settings
127 steps 01111111 +12.7 mm
:
32 steps 00100000 +3.2 mm
:
16 steps 00010000 +1.6 mm
:
8 steps 00001000 +0.8 mm
:
00000000 4 mm  Initial setting
:
-8 steps 11110111 -0.8 mm
:
-16 steps 11101111 -1.6 mm
:
-128 steps 10000000 -12.8 mm
Note:
The surrounding margin (right / left / top /
bottom) is set in Unique Switch 52. If you want to
adjust only bottom margin, adjust it in this switch.
6 0
5 0
4 0
3 0
2 0
1 0
0 0
Machine Parameter 248
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Printer registration
adjustment.
Adjusts the top margin for
duplex printing cassette.
The plus setting increases
the top margin and the minus
setting decreases it.
Each setting changes by
0.1 mm.
Switch 76543210 Settings
127 steps 01111111 +12.7 mm
:
32 steps 00100000 +3.2 mm
:
16 steps 00010000 +1.6 mm
:
8 steps 00001000 +0.8 mm
:
00000000 4 mm  Initial setting
:
-8 steps 11110111 -0.8 mm
:
-16 steps 11101111 -1.6 mm
:
-128 steps 10000000 -12.8 mm
Note:
The surrounding margin (right / left / top /
bottom) is set in Unique Switch 52. If you want to
adjust only top margin, adjust it in this switch.
6 0
5 0
4 0
3 0
2 0
1 0
0 0
Machine Parameter 249 ~ 284 — Factory use only