Muratec F-525, Field Engineering Manual

Page: 154 / 383

3-70
Memory Switch 071 — Operation
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 1 Print TCR with the original
page during memory
transmission when the result
is NG
0: No
1: Yes
For easy identification, the first page of a document
stored for memory transmission will print along a
TCR when the transmission result is NG.
4 0 Factory use only
3 1 Print TCR with the original
page during memory
transmission when the result
is OK
0: No
1: Yes
For easy identification, the first page of a document
stored for memory transmission will print along a
TCR when the transmission result is OK.
2 0 Factory use only
1 0 Factory use only
0 0 Display modem speed
0: No
1: Yes
The transmit/receive speed is displayed in the LCD.
Memory switch071 … Print TCR with the original page
Switch 3 0 1
Switch 5 0 1 0 1
When Memory transmission was OK, … No No Yes Yes
When Memory transmission was NG, … No Yes No Yes
When all broadcast transmissions were OK, … No No Yes Yes
When some broadcast transmissions were NG, … No Yes No Yes
Memory Switch 072 — Operation
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 1 Erase polled document
0: No
1: Yes
Determines if a document stored for polling is
erased after being polled.
0 1 Print TCR after the batch
transmission
0: No
1: Yes
Determines if printing the confirmation report after
completing the batch transmission.
Memory Switch 073 ~ 096 — Factory use only