Muratec F-525, Field Engineering Manual

Page: 169 / 383

3-85
Unique Switch 020 — Reception
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 1 No use
4 1 Transmit CED signal
0: No
1: Yes
Determines if sending CED signal.
3 1 Pseudo-ring start time
(seconds)
5 6 8 10
Sets the time the pseudo-ring begins after
answering an incoming call.
(Fax/Tel Ready or Tel/Fax Ready mode only.)
2 0 Switch 3: 0 0 1 1
Switch 2: 0 1 0 1
1 1 Printout the pages completed
to receive during receiving
into memory
0: No
1: Yes
Determines if whether to printout the page which
data is completed to receive during receiving it into
fax’s memory.
0 1 Avoid time out in ECM
reception
0: No
1: Yes
Disables 60 seconds RNR time out in ECM mode.
Unique Switch 021 — Reception
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 1 Factory use only
5 1 Factory use only
4 0 Factory use only
3 1 TCF check time
(in 100 ms units)
If the TCF time is such that poor image quality is the
result, lengthen the TCF check time.
Switch 3 2 1 0 Time
2 0 0 0 0 0 0 ms
0 0 0 1 100 ms
0 0 1 0 200 ms
0 0 1 1 300 ms
0 1 0 0 400 ms
0 1 0 1 500 ms
1 1 0 1 1 0 600 ms
0 1 1 1 700 ms
1 0 0 0 800 ms
1 0 0 1 900 ms
1 0 1 0 1000 ms

Initial setting
1 0 1 1 1100 ms
0 0 1 1 0 0 1200 ms
1 1 0 1 1300 ms
1 1 1 0 1400 ms
1 1 1 1 1500 ms
 
 