manualshive.com logo in svg

Muratec F-525, Field Engineering Manual, Page: 261 / 383

Share
Download
Muratec F-525 Field Engineering Manual Download Page 261

3-177

3.32.4 Changing the OfficeBridge Notification Status to InfoMonitor

This function stops the notification of events from OfficeBridge to InfoMonitor. It helps determining failure by 

stopping the unnecessary broadcast packet from the InfoMonitor temporarily, in case of network trouble.

IMPORTANT:  

When stopping the OfficeBridge notification, first shut down the InfoMonitor. Otherwise the ac-

cess from the InfoMonitor to the OfficeBridge will restart the notification.

1. Open the network service screen. (see page 3-174)
2. Click “OfficeBridge Notification Status to InfoMonitor(s)”.
3. Click [Stop].

Summary of Contents for F-525
































































































































































































































































































































































































Reviews:

No comments