manualshive.com logo in svg

Muratec F-525, Field Engineering Manual, Page: 233 / 383

Share
Download
Muratec F-525 Field Engineering Manual Download Page 233

3-149

Simple report

 

Note:

 Some device may not be available on this machine.

Paper Cassette Status:

  Paper Supply Device: The device names that supply paper.

Items

Detail

Present setting

Whether the device is available or not, if available the supplied paper size or 

“Paper out” is printed.

Print Pages (Every I/C)

The printed pages per device. The value in the parenthesis shows the pag-

es printed with the current drum. (I/C = Imaging Cartridge)

JAM Pages (Every I/C)

The jammed pages per device. The value in the parenthesis shows the 

pages printed with the current drum. (I/C = Imaging Cartridge)

Media

The media supplied to the device.

Printer Jam Info: The information of pages printed normally and jammed per paper supply devices.

Scan Pages / Rate:

Items

Detail

Copy

The numbers or documents copied and copied times, per ADF, FBS or 

RADF.

Fax

The numbers or documents transmitted and transmitted times, per ADF, 

FBS or RADF.

Scanner 

The numbers or documents scanned in scanner mode and scanned times, 

per ADF, FBS or RADF.

Sub Total

The total of copy, fax and scan function.

Total

The total of all scanned documents.

PageCount

The total pages counted according to the counter setting. (If the documents 

are legal-sized, the machine will count 5 pages for every 4 sheets.)

Summary of Contents for F-525
































































































































































































































































































































































































Reviews:

No comments