Muratec F-525 Field Engineering Manual Download Page 205

Page: 205 / 383

3-121

3.14 Line Tests

This mode offers several internal tests and ability to monitor certain unit output functions. Included are

relay tests, modem signal output monitoring, and DTMF output monitoring.

3.14.1 Relay Test

This mode tests the on/off operation of various relays and switches.

1. Press <Setting>, <*>, <1>, <2>.

2. Select the line you want to test. If the optional second phone line is not attached, you can only test

line1.

3. Select [Relay].

4. Select the relay you want to test. When it is selected, it will be highlighted.

CML relay – on

DP relay – on

L relay – on

RI relay – on

CML relay – off

DP relay – off

L relay –off

RI relay – off

S relay – on

H relay – on/

CONT24V relay – on

Hook key

S relay – off

H relay –off

CONT24V relay – off

5. Press [Enter] to exit the relay test mode.

Summary of Contents for F-525
































































































































































































































































































































































































Search results

Summary of Contents for F-525

Reviews:

Related manuals for F-525

Brands by name

Popular brands

Muratec F-525, Field Engineering Manual

Search results

Summary of Contents for F-525

Reviews:

Related manuals for F-525

Brands by name

Popular brands