Muratec F-525 Field Engineering Manual Download Page 237

Page: 237 / 383

3-153

Third page of the detailed report

Paper Size and Printed pages:

Note:

Some paper size may not be available on this machine.

Items

Detail

Paper size

The paper used for printing

Copy (Every I/C)

The number of pages used for copy. The value in the parenthesis shows the

pages using the current drum. (I/C = Imaging Cartridge)

Fax (Every I/C)

The number of pages used for fax printing. The value in the parenthesis

shows the pages using the current drum. (I/C = Imaging Cartridge)

Pri. (Every I/C)

The number of pages used for PC printing. The value in the parenthesis

shows the pages using the current drum. (I/C = Imaging Cartridge)

LST. (Every I/C)

The number of pages used to print lists. The value in the parenthesis shows

the pages using the current drum. (I/C = Imaging Cartridge)

Sub Total

The total of copy, fax and scan used pages.

TOTAL

The total of all printed pages.

PageCount

The total pages counted according to the counter setting. (If the documents

are legal-sized, the machine will count 5 pages for every 4 sheets.)

Media and Pages Printed:

Items

Detail

Medial

The medial (plane paper, Paste board, OHP transparency,

Envelopes / Postcards) for copying and printing.

Copy

The number of pages used for copy.

Printer

The number of pages used for PC printing.

Summary of Contents for F-525
































































































































































































































































































































































































Search results

Summary of Contents for F-525

Reviews:

Related manuals for F-525

Brands by name

Popular brands

Muratec F-525, Field Engineering Manual

Search results

Summary of Contents for F-525

Reviews:

Related manuals for F-525

Brands by name

Popular brands