Muratec F-525, Field Engineering Manual

Page: 142 / 383

3-58
Memory Switch 014 — Factory use only
Memory Switch 015 — Transmission
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Program individual autodialer
attributes
0: No
1: Yes
Allows individual setting of memory switches 010 as
attribute 1, 011 as attribute 2, 012 as attribute 3 and
013 as attribute 4 when fax or e-mail destinatilns
are registered in the address book. (Refer to page
3-73 for settings.)
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Sending RTC signal when
transmission is canceled
0: Yes
1: No
RTC signal is sent at the end of the transmission.
When set at “0”, the machine will send the RTC if
the transmission is canceled. No error will occur.
When set at “1”, an error will occur because
RTC will not be sent at the end of a canceled
transmission.
1 1 Cancel redial if T.4.1 or T.4.4
error occurs
0: Yes
1: No
When set at “0”, if a T.4.1 or T.4.4 error occurs, the
machine will not retry the transmission.
0 1 Action after EOR signal
0: Continue
1: Discontinue
Sets action after receiving PPR four times at 2400
bps.
Memory Switch 016 — Transmission
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 1 Additional data on TTI
transmit
0: No
1: Yes
When set at “0”, the transmission of the additional
data (time, the number of pages, file number, etc)
is disabled.
Note:
This switch is available only when Memory
switch 012, bit 4 and/or Memory switch 013, bit 5 is
available.
2 1 Subscriber ID transmit
0: No
1: Yes
When set at “0”, the transmission of the subscriber
ID is disabled.
Note:
This switch is available only when Memory
switch 012, bit 4 and/or Memory switch 013, bit 5 is
available.
1 1 TTI (name) transmit
0: No
1: Yes
When set at “0”, the transmission of the name that
is stored in the unit is disabled.
Note:
This switch is available only when Memory
switch 012, bit 4 and/or Memory switch 013, bit 5 is
available.
0 0 Factory use only
Memory Switch 017 ~ 019 — Factory use only