Muratec F-525, Field Engineering Manual

Page: 138 / 383

3-54
Memory Switch 005 — Dialer
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 1 Ring signal detect time Set the time that an incoming ring will not be detected
after hanging up. (Fax/Tel Ready mode only.)
Switch 6 5 4
0 0 0 100 ms
0 0 1 200 ms
0 1 0 300 ms
0 1 1 400 ms
1 0 0 500 ms
1 0 1 600 ms
1 1 0 700 ms
1 1 1 800 ms
5 1
4 0
3 0 Number of CI signal detection
in Fax/Tel Ready mode
0: Detect 1 time
1: Detect 2 times
Select the number of detection time of CI signal in
the Fax/Tel Ready mode or in the ringer silent mode.
Incoming calls are answered according to this setting
regardless of the number of rings chosen in the User
Settings.
2 0 Dual ring detection
0: No
1: Yes
When enabled, the machine is able to auto answer
an incoming ring with an off time of 120 - 60 ms.
1 0 Long ring detection
0: No
1: Yes
Allows the machine to respond to an incoming ring
if the ring on time is longer than two seconds.
0 1 Frequency of the CI signal
detection
0: No
1: Yes When disabled, the unit will not check the frequency of
the incoming CI signal.
Memory Switch 006 ~ 009 — Factory use only
 
 
 
 
 