Muratec F-525, Field Engineering Manual

Page: 195 / 383

3-111
3.11 Test Modes
This mode offers the ability to print a test pattern and monitor certain unit output functions. Included
are followings.
1. Press <Setting>, <*>, <0>, <9> to enter the test mode.
2. Select the desired test mode.
3.11.1 Life Monitor
The life monitor displays the current software version, the total number of pages scanned, printed, and
transmitted, the number of drums replaced and the total page count on the current drum.
Note: The All RAM Clear setting does not clear the life monitor. To clear, see below.
1. Press <Setting>, <*>, <0>, <9> , then select [Life Monitor].
•
ROM Ver.0
= displays the version of the machine ROM on the main control board
•
01 to 02
= displays software version of the optional kits
•
NGP2
= displays version of network ROM on the NGP board
•
NGPBT
= displays version of network boot ROM on the NGP board
•
NGPNL
= displays version of the panel ROM
2. Press [Detail] to see the options.
•
Scan Pages
= displays total pages scanned
•
Print Pages
= displays total pages printed
•
Tx Pages
= displays total pages transmitted
•
Drum Rplcd
= displays drum replaced times
•
Drum Life
= displays total pages printed on current drum