Muratec F-525 Field Engineering Manual Download Page 231

Page: 231 / 383

3-147

26-1. You can set the interval for service report auto transmission from 1 to 12 months.

The default setting is 3 months. Enter the desired number (01 to 12) using the cursor key or the

numeric keypad, and press [Enter].

26-2. Enter the day and time in 24-hour format when to send the report, and press [Enter].

For instance, to send the report every 5th day of the month at 2 pm, press,

0, 5, 0, 2, 0, 0.

27. Press <Reset> to go back to the stand by mode.

3.28.2 Clear service report

To clear the information of service report:

1. Press <Setting>, <*>, <4>, <2>.

2. Press [Delete].

3. To clear the information of service report setting, press [Yes].

To finish the operation without clearing, press [No].

Summary of Contents for F-525
































































































































































































































































































































































































Search results

Summary of Contents for F-525

Reviews:

Related manuals for F-525

Brands by name

Popular brands

Muratec F-525, Field Engineering Manual

Search results

Summary of Contents for F-525

Reviews:

Related manuals for F-525

Brands by name

Popular brands